Installation instructions

1. The product shall be installed by qualified installation personnel.
2. During installation, the machine is equipped with an exhaust duct with a length of 1800mm (two models, namely 150mm and 160mm) and a small brush.
3. The diameters of the hole in the wall are 160mm (for exhaust duct of 150mm) and 170mm (for exhaust duct of 160mm). In case of need for lengthening the wind pipe, never buy wind pipe at random, and please contact the local distributor.
4. Please refer to the attached pictures for the installation size.

Cleaning instructions

1. Unscrew the oil drain valve to clean waste oil which is inedible.
2. Hold the right filter plate handle, move it to the left, and push it, so as to fetch the handle outward.
3. Unscrew the handle nut, and separate the filter plate for convenience of cleaning.
4. During installation, the wide edge of the filter plate is in the outer position, while the narrow edge is in the inner position.